VRF Vs SPLIT UNITS Applications

 

SPLIT UNIT

1. Select when individual person are using as per their will or like bedrooms, guest rooms where very less units run simultaneously. If VRF is used for such application, it leads to energy wastage as 20 HP outdoor units have to run even if .8 ton IDU is running. So, Split unit is used in such applications.

2. It is used when individual demands for their Room.

3. Sometimes the VRF system is not available in some Rooms, in such place, split can be used. They can be used anywhere.

 

VRF- Units

1. When many indoor Units are there, which run simultaneously, to avoid many separate outdoor units, VRF system can be used.

2. In office, where many rooms used AC simultaneously, VRF systems can be used.

 

Comments

Post a Comment

Popular posts from this blog

Electrical Load- Transformer allocation

Image
    ELECTRICAL LOAD CALCULATION CHILLER PLANT 0.5 kw  per ton  is an “annual average  chiller -plant efficiency.” For Example, 300 TR,  power consumption in kW= 324*.5    = 1.5 In the below Example, 300 TR of chiller Consumes the 193 kW of Energy. The water cooled version has a full load efficiency of about 0.7 kW/Ton. The air cooled version has a full load efficiency of about 1.1 kW/Ton. For example, if the system had a pump with a known efficiency of 65 percent and the pump delivers 250 gallons per minute to a total head of 72 feet, the horsepower of the system is: Hp = \frac{250\times 72}{3,960\times 0.65} = 6.99\text{ horsepower} H p = 3 , 9 6 0 × 0 . 6 5 2 5 0 × 7 2 ​ = 6 . 9 9  horsepower In the above Example,  efficiency is 80%. H p = 3 , 9 6 0 × 0 . 6 5 816×50 ​ =15.85  Hp =15.85X.746 =11.8 kW Chiller Cooling Tower: 350 TR cooling tower Fan consumes 22.38 kW. Rule: 6 CFM per Watt AHU:  375 CFM PER TON Electrical POWER C...
Read more

Efficiency Booster- For anything

Are you tired of trying to hard trying to save project or goals from falling apart? I was. So, I have come up with some ideas that will help in managing the stress retaining the efficiency your work demands. Below I have listed some of them. If you have some, let me know in the comment section. 1. To make any work efficient,  Break down the work into many smaller steps.   2. Which steps are repeated often? Try to automate or use easier tools for the work. 3. Which Steps requires more time and attention? Use efficient tools and manpower. 4. There are some items or actions that may seem insignificant but the work cannot be moved forward without them.  5. Make the decisions regarding the things that take a long time. For example, if the project needs airplane after some months and You need to order from others. Otherwise, the decisions will linger and it will be out of our control.  6. Create work schedule for the works and break down the work for example, if the p...
Read more

Think Like a Designer-Hotel Building (How they think, Decide)

  GUIDE: HOTEL BUILDING                                                                                                                                                                             -Harihar Poudel Experience-With Experts Today I am writing my experience as an Engineer. I got a chance to have a meeting with Hotel Design and Architecture Experts on how to make the hotel efficient. Though, I am not an architect, as an engineer I am naturally Curious how they th...
Read more